REXROTH MSK030C-0900-NN-M1-UP1-NNNN伺服电机
1.产 品 介 绍
品牌：REXROTH
型号说明：REXROTH MSK030C-0900-NN-M1-UP1-NNNN伺服电机
优势：供应进口原装，专业停产配件。
公司主营特点：主营产品各种模块/卡件，控制器，触摸屏，伺服驱动器。
2.产 品 详 情 资 料：
REXROTH MSK030C-0900-NN-M1-UP1-NNNN附录B包含当前支持的控制器列表，以及每个控制器的默认配置列表。块与扇区逻辑块定义磁盘设备的信息单位。162Bug将磁盘视为划分为逻辑块的存储区域。默认情况下，系统中每个块设备的逻辑块大小设置为256字节。REXROTH MSK030C-0900-NN-M1-UP1-NNNN可以使用IOT命令根据每个设备更改块大小。扇区定义控制器查看的媒体本身的信息单位。不同控制器的扇区大小不同，可以使用IOT命令显示和更改特定设备的值。当请求磁盘传输时，传输的开始和大小以块为单位指定。162Bug将其转换为等效的扇区规范，然后将其传递给控制器以启动传输。如果从块到扇区的转换产生分数扇区计数，则返回错误且不传输数据。REXROTH MSK030C-0900-NN-M1-UP1-NNNN
Appendix B contains a list of the controllers presently supported, as well as a list of the default configurations for each controller.Blocks Versus Sectors The logical block defines the unit of information for disk devices. A disk is viewed by 162Bug as a storage area divided into logical blocks. By default, the logical block size is set to 256 bytes for every block device in the system. REXROTH MSK030C-0900-NN-M1-UP1-NNNNThe block size can be changed on a per device basis with the IOT command. The sector defines the unit of information for the media itself, as viewed by the controller. The sector size varies for different controllers, and the value for a specific device can be displayed and changed with the IOT command. When a disk transfer is requested, the start and size of the transfer is specified in blocks. 162Bug translates this into an equivalent sector specification, which is then passed on to the controller to initiate the transfer. If the conversion from blocks to sectors yields a fractional sector count, an error is returned and no data is transferred.REXROTH MSK030C-0900-NN-M1-UP1-NNNN
3.产 品 展 示
4.公 司 优 势 主 营 产 品
5.相 关 产 品 展 示
本篇文章出自瑞昌明盛自动化设备有限公司，转载请附上此链接:
