B&R 8MSA3L.R0-30伺服电机
1.产 品 介 绍
品牌：B&R
型号：B&R 8MSA3L.R0-30伺服电机
产品说明：模块卡件
特点：模块/卡件，控制器，触摸屏，伺服驱动器
优势：供应进口原装，专业停产配件。
快递方式：国内顺丰、德邦、京东快递包邮，按照实际报价货期发货
2.产 品 详 情 资 料：
B&R 8MSA3L.R0-30伺服电机90-30 PLC的15针串行端口连接器在电源上；Workmaster II和Workmaster计算机的37针串行端口连接器位于编程计算机的工作站接口板上。这些连接的电缆类型应为24 AWG（.22 mm2），30V计算机级。建议短电缆采用超柔性结构。注意：该电缆设计用于PC或XT等老式计算机，B&R 8MSA3L.R0-30伺不太可能用于新项目。电缆功能该电缆在PCM、ADC或CMM模块上的RS-232端口与Workmaster计算机或IBM-XT或等效个人计算机上的串行端口之间提供RS-232信号连接。尽管B&R 8MSA3L.R0-30伺（除了目录号标签），但内部引脚连接不同，或CMM和编程器接地连接必须处于相同的接地电位。接线错误会导致编程器或模块损坏。B&R 8MSA3L.R0-30伺
The 15-pin serial port connector for the 90-30 PLC is on the power supply; the 37-pin serial port connector for Workmaster II and Workmaster computers is on the Work Station Interface board in the programming computer. The cable type for these connections should B&R 8MSA3L.R0-30伺be 24 AWG (.22 mm2 ), 30V computer grade. Extra flexible construction is recommended for short lengths.Note: This cable was designed for use with older computers such as PC or XT types and would not likely be used for new projects. Function of cable This cable provides RS-232 signal connections between the RS-232 port on a PCM, ADC, or CMM module and a serial port on a Workmaster computer or IBM-XT or equivalent Personal Computer.Although the B&R 8MSA3L.R0-30伺(except for catalog number labeling), the internal pin connections are different.The Series 90-30 PLC baseplate that contains the PCM, ADC, or CMM and the programmer ground connections must be at the same ground potential. Incorrect wiring will result in damage to the programmer or the module.B&R 8MSA3L.R0-30伺
3.产 品 展 示
4.关 于 我 们
本篇文章出自瑞昌明盛自动化设备有限公司，转载请附上此链接:
