REXROTH MSK070D-0450-NN-M1-UP1-NSNN伺服电机
1.产 品 介 绍
品牌：REXROTH
型号说明：REXROTH MSK070D-0450-NN-M1-UP1-NSNN伺服电机
优势：供应进口原装，专业停产配件。
公司主营特点：主营产品各种模块/卡件，控制器，触摸屏，伺服驱动器。
2.产 品 详 情 资 料：
REXROTH MSK070D-0450-NN-M1-UP1-NSNN5V直流电源和配电5V直流电源不必单独布线，因为它已经作为子机架的一部分安装。CPU、接口控制和I/O模块需要5V直流电源。它由带有F 7130A标识的时钟24 V DC/5 V DC电源模块生成。子架配有两个电源模块。电源模块并联。如果其中一个故障，另一个为PES供电。单元监控电源模块（用于CPU、I/O和接口）的5V DC输出电压，REXROTH MSK070D-0450-NN-M1-UP1-NSNN检查欠压和故障。在电源模块故障的情况下，操作系统通过系统变量向用户的程序提供该信息。如果5 V直流系统电源出现故障，模块上的硬件时钟和sRAM将由锂电池缓冲，锂电池也位于模块上。3.7.6 I/O总线仅将模块插入子机架即可建立与I/O模块的连接。不需要进一步的步骤。对于冗余I/O总线，未安装子机架后部的跳线插头Z 6007。REXROTH MSK070D-0450-NN-M1-UP1-NSNN
5 V DC Supply and Distribution The 5 V DC power supply does not have to be wired separately as it is already installed as part of the subrack. The 5 V DC power is needed by the CPU, the control of the interfaces, and I/O modules. REXROTH MSK070D-0450-NN-M1-UP1-NSNNIt is generated by clocked 24 V DC/5 V DC power supply modules bearing the F 7130A identification. The subrack is equipped with two power supply modules. The power supply modules are paralleled. If one of them fails, the other supplies the PES. The 5 V DC output voltage of the power supply modules (for the CPU, I/ O, and the interfaces) are monitored on the central unit checking undervoltage and failure. In case of a faulty power supply module the operating system supplies the user's program via a system variable with this information. In case the 5 V DC system power fails hardware clock and sRAM on the central module are buffered by a lithium battery which is also on the central module. 3.7.6 The I/O Bus Just plugging-in the central modules into the subrack establishes connection to the I/O modules. No further steps are required. With the redundant I/O bus the jumper plug Z 6007 on the rear of the subrack is not installed.REXROTH MSK070D-0450-NN-M1-UP1-NSNN
3.产 品 展 示
4.公 司 优 势 主 营 产 品
5.关 于 相 关 产 品 展 示
本篇文章出自瑞昌明盛自动化设备有限公司，转载请附上此链接:
