REXROTH MSK030B-0900-NN-M1-UG0-NNNN伺服电机
1.产 品 介 绍
品牌：REXROTH
型号说明：REXROTH MSK030B-0900-NN-M1-UG0-NNNN伺服电机
优势：供应进口原装，专业停产配件。
公司主营特点：主营产品各种模块/卡件，控制器，触摸屏，伺服驱动器。
2.产 品 详 情 资 料：
REXROTH MSK030B-0900-NN-M1-UG0-NNNN2个带电流隔离的RS 485接口。Transm公司。速率：57600 bps。通过交换机设置为9600 bps和57600 bps，或设置其他传输。软件速率（软件值具有优先级）–诊断显示和2个LED指示灯，用于显示系统外的信息、I/O级别和用户程序–双端口RAM，用于快速访问第二个模块的内存–硬件时钟、电池支持–I/O总线逻辑和与输入/输出模块的连接–故障保护看门狗–电源监控，可测试（5 V系统电压）–电池监测4.6.3协处理器模块REXROTH MSK030B-0900-NN-M1-UG0-NNNN在H51q HS PES的每个已安装模块旁边，最多可安装三个协处理器模块。协处理器模块主要包括：–时钟频率为10 MHz的微处理器HD 64180–操作系统EPROM–PLC主项目的RAM注：主项目的内存通过监控模块上的电池进行缓冲。
2 interfaces RS 485 with galvanic isolation. Transm. rate: max. 57600 bps. Set to 9600 bps and to 57600 bps by switch, or setting also of other transm. rates by software (the software values have priority) – Diagnostic display and 2 LEDs for information out of the system, I/O level and user's program – Dual Port RAM for fast memory access to the second central module – hardware clock, battery backed – I/O bus logic and connection to the input-/output modules – Fail-safe watchdog – power supply monitoring, testable (5 V system voltage) – Battery monitoring 4.6.3 Coprozessor Module F 8621A Next to each installed central module of the H51q-HS PES up to three coprocessor modules can be installed. The coprocessor module mainly contains: – Microprocessor HD 64180 with a clock frequency of 10 MHz – Operating system EPROM – RAM for a PLC master project Note: The RAM for the master project is buffered via the batteries on the monitoring module.REXROTH MSK030B-0900-NN-M1-UG0-NNNN
3.产 品 展 示
4.公 司 优 势 主 营 产 品
5.关 于 相 关 产 品 展 示
本篇文章出自瑞昌明盛自动化设备有限公司，转载请附上此链接:
